|
|
|
SEALANT
SAVERS |
|
A solution to the problem of what to do with a
partially used tube of sealant. Contact with the air will cause the
sealant to harden in the nozzle, making it unusable.
|
|
A Sealant Saver
will keep the contents of a tube of sealant in a usable state for a
matter of weeks rather than days, without causing damage to the nozzle.
Made of tough,
chemically resistant synthetic rubber the Sealant Saver is pushed
into the end of the nozzle. It is compressed as it passes through the
narrowest point and then returns to size inside the nozzle, forming an
airtight seal. Simply pull it out when the sealant is needed. |
|
|
|
The Sealant
Saver works on both sizes of removable nozzles available in DIY
stores and builders merchants (15mm and 25mm) as well as fixed nozzle
tubes such as those containing gap filling adhesive.
Works on any
sealant, caulk or adhesive. Supplied in a handy plastic box for toolbox
storage.
Extends the life
of your sealant, so you don’t have to buy new - saving you time and
money. |
|
| |
|
|
|
How to
Use |
|
|
-
Remove tube from sealant gun or press pressure
release plate to stop the flow of sealant (see left)
-
Choose the size of Sealant Saver to suit nozzle
opening (see top picture) and insert it slowly and firmly with a
twisting motion
-
Clean off any sealant
-
Lie tube on its side until it is needed again
-
Then pull out Sealant Saver, clean it and return
it to its box for future use
|
|
Box
of 9 mixed Sealant Savers
|
|
|
|
|
|
|
|
|
